How to Clean a Dirt Bike Helmet: Learn Within Simple Steps

Dirt bike riding is a great way to stay active and have fun. But, even with the most seasoned riders, it’s easy to get your helmet a little dirty, which means it needs regular cleaning. 

Don’t worry though! This guide will walk you through every step of how to clean a dirt bike helmet. 

The process will cover everything from cleaning the helmet’s exterior to its visor and interior pads. Follow these steps and your dirt bike helmet will be good as new in no time!

How To Clean A Dirt Bike Helmet In Just 7 Steps 

Without discussing any further, we will now jump into our main task. The below 7 steps will help you regarding how to clean dirt bike helmet. Let’s start! 

Step 1: Filling The Bucket With Mild Soap and Water

The first step to cleaning your dirt bike helmet is to fill a bucket with soapy water. You can use any type of soap, but dish soap or shampoo will work best. But you should never use any strong cleaning agent. Because they can damage the color of your helmet. 

Then, submerge your helmet in the water and let it soak for a few minutes. This will help loosen any dirt and grime that is stuck to the surface.

Step 2: Pat Your Helmet With a Sponge or Soft Cloth

Pat your helmet with a sponge or cloth to remove any dirt, dust, or debris. Be sure to avoid any sharp objects that could scratch the surface of your helmet. Rinse the sponge or cloth in clean water and wring it out before continuing.

Step 3: Rinse The Helmet Properly 

It is important to rinse the helmet thoroughly before taking it off. So, make a cleaning solution using mild soap or shampoo and warm water to eliminate any dirt or grime. After that rinse the helmet completely, inside and out.

Once you have rinsed the helmet, dry it off with a clean cloth. If you are going to store the helmet, make sure it is completely dry before doing so.

Step 4:- Apply Degreaser Over The Dirt Bike Helmet 

In this step, start by applying a degreaser to the entire helmet, paying special attention to any areas that are particularly dirty. You can either use a commercial degreaser or make your own by mixing one part dish soap with two parts water.

Once you’ve applied the degreaser, let it sit for a few minutes to give it time to work. Then, using a soft cloth or sponge, gently scrub the helmet until all the dirt and grime comes off. Rinse the helmet thoroughly with clean water when you’re finished.

Step 5:- Thoroughly Rinse All The Parts Of Your Helmet 

Thoroughly rinse the helmet and all of its parts with clean water. Don’t forget to get into all of the nooks and crannies, including the visor, vents, and padding. 

If your helmet has any removable parts, take them off and rinse them separately. Once you’ve rinsed everything, let it all air dry completely before putting the helmet back together.

Step 6: Repeat Steps 2 -5 Until The Dirt Is Gone

Assuming you’re satisfied with the level of cleanliness of your helmet at this point, it’s time to move on to the final step. Simply put, all you need to do now is repeat steps 2-5 until the dirt is completely gone. 

Depending on the severity of the dirt, this could take a few minutes or a few hours. Just be patient and keep at it until your helmet looks good as new!

Step 7:  Reassemble Your Clean Dirt Bike Helmet

Now it is time to reassemble your helmet. Before doing it, air dry all the parts properly. First, put the padding back in, being careful to line up all of the edges. 

Once the padding is back in place, put the visor on and screw it in tight. Your helmet should be clean and ready to use! Cleaning a dir bike helmet is now super easy for you. 

How to Clean Bugs Off Motorcycle Helmet

When it comes to keeping your motorcycle helmet clean, one of the most important things to remember is to remove any bugs that may have become attached regularly. 

Not only can these insects cause your helmet to become dirty, but they can also obstruct your vision while riding. 

Here is a step-by-step way on how to clean bugs off motorcycle helmets:

1. Begin by using a soft cloth or microfiber towel to gently wipe away any loose debris from the surface of your helmet.
2. Next, use a mild soap and water solution to wet the cloth or towel and continue wiping down the helmet. Be sure to avoid using any harsh cleaning chemicals as they could damage the finish of your helmet.
3. Once you have removed all of the visible dirt and grime, rinse the helmet off with clean water.
4. Use a soft, dry cloth to buff the surface of the helmet until it is completely dry.
5. If there are any stubborn areas that seem difficult to clean, you can use a cotton swab dampened with rubbing alcohol to target those specific spots.

How to Clean Dirt Bike Helmet Pads

If you want to know how to clean a motocross helmet, this section is for you. Initiate by removing the pads from the helmet. Once they are removed, soak them in a sink or bucket of soapy water. Let them soak for at least 30 minutes to loosen any dirt and grime.

After they have soaked, scrub the pads with a soft brush or cloth. Clean the dirties areas with special attention. Then wash the pads thoroughly with clean water.

If your pads are still not clean, you can try soaking them in a mixture of 1 part vinegar to 3 parts water. Let them soak for at least 30 minutes before scrubbing and rinsing as before.

How to Clean Bugs Off Helmet Visor

It’s inevitable- sooner or later, you’re going to get bugs on your helmet visor while riding. Here’s a step-by-step process on how to clean them off:

1. First, wipe off any large chunks of debris with a soft, dry cloth.
2. For the tougher spots, dampen a cloth with water and gently scrub until the bug residue comes off.
3. If needed, you can also use a mild soap solution to help loosen stubborn dirt and grime. Just be sure to rinse the soap off completely afterward.
4. Once everything is wiped clean, finish up by buffing the visor with a dry cloth to prevent streaks and smears.

Final Thought on How To Clean A Dirt Bike Helmet

We have shown you the entire process of how to clean a dirt bike helmet. Remember, you should not use any hard cleaning substances to prevent any unexpected damage. This cleaning method can be applicable for modular helmets, full face, and half face helmets as well but with some modifications of course.

However, we request you to share your opinion regarding how to clean motocross helmet. Don’t forget to leave your comment.