How to Clean Helmet Visor at Home

Are you looking for a solution on how to clean helmet visors at home? Cleaning your helmet visor is an essential part of motorcycle care that should not be overlooked. 

From the roads to the trails and everywhere in between, dirt and debris can get into your helmet’s ventilation system or cling to the visor itself. Especially the dirtbike helmets and open faced helmets get dirty easily.

To help protect both you and your gear, we’ll walk you through how to clean your motorcycle helmet visor in just 8 easy steps.  Let’s get started!

What Is A Helmet Visor?

A helmet visor is a piece of clear or tinted plastic that attaches to the front of a motorcycle helmet. It protects the rider’s eyes from wind, bugs, and debris while riding.

What Should I Use To Clean My Helmet Visor?

One of the most important parts of maintaining your motorcycle helmet is keeping the visor clean. 

There are a few different options when it comes to cleaning your helmet visor. 

• You can a solution made of mild soap and water. This can be applied with a soft cloth or sponge, and then wiped away with a clean, dry cloth.

• Another option is to use a commercially available cleaning solution specifically designed for motorcycle helmets. 

• If you have an old toothbrush, this can also be used to gently scrub away any stubborn dirt or grime. 

How To Clean Helmet Visor At Home In Just 8 Steps

Cleaning a motorcycle helmet visor may seem challenging to you. That’s why we have made an easy step-by-step guide to help you. Let’s dive in! 

Step 1: Remove All The Padding From Your Helmet

If you want to clean your helmet visor properly, you need to remove all of the paddings from your helmet first. 

To do this, simply loosen the straps that hold the padding in place and then pull it out. Once the padding is removed, you should be able to see the visor clearly.

Step 2: Dampen A Clean Cloth In Hot Water

If your helmet visor is significantly dirty, you’ll want to start by dampening a clean cloth in hot water. Doing this will help loosen any stubborn grime or dirt attached to the visor. 

Never use boiling water, as this could damage the material of your helmet visor. Once the cloth is damp, gently wipe it over the surface of the visor until all the dirt has been removed.

Step 3: Cover The Wet Cloth Over The Visor 

After wetting the cloth, cover the entire visor with the cloth. Make sure that the cloth is not too tight or too loose. You don’t want there to be any wrinkles in the cloth, as this could cause scratching. 

Once the cloth is in place, let it sit for at least five minutes. This will give the cleaning solution time to take effect.

Step 4: Scrub The Visor With A Microfiber Cloth & Cleaning Agent 

The next step of how to clean helmet visors at home? is to scrub. Now, you’ll need a microfiber cloth and a cleaning agent. You can use any type of cleaning agent you like, but we recommend using something that won’t damage the visor’s coating.

Once you have your supplies, simply scrub the visor with the microfiber cloth until it’s clean. Remember to rinse the cloth often to avoid spreading dirt and grime.

If your visor is still foggy after scrubbing, you can try using a commercial anti-fog solution. Simply apply the solution to a clean microfiber cloth and wipe it over the visor.

Step 5: It’s Time To Rinse The Visor 

After you’ve scrubbed the visor with soap and water, it’s time to rinse it off. Use clean water to rinse away any residue from the soap or cleaners. 

Make sure to rinse the visor’s edges well, as this is where most of the grime builds up. Once you’ve rinsed the visor, dry it with a clean microfiber cloth.

Step 6: Ways To Clean The Inside of Your Visor 

There are a few ways to clean the inside of your visor, depending on how dirty it is. For a quick clean, you can use a soft cloth or sponge with some mild soap and water. 

You can also use a commercial cleaner specifically designed for cleaning motorcycle helmet visors. You must follow the instructions on the cleaner, as some require you to soak the visor in the solution before wiping it clean. 

Step 7: Detach The Visor If Possible From Your Helmet and Rinse It

If you can safely remove your helmet visor, do so and rinse it with clean water. Be careful not to touch the inside of the visor, as this is where most of the dirt and grime will be. 

If you cannot remove your visor, simply hold it under running water and use a soft cloth to wipe away any dirt or grime.

Step 8: Leave The Helmet For  2-3 hours To Air Dry

After you have removed all the dirt, grime, and bugs from your helmet visor, it is time to leave the helmet to air dry. Depending on the temperature and humidity of your location, it may take 2-3 hours for the helmet to completely air dry. 

Final Words On How to Clean Helmet Visor At Home?

We hope you found our tips helpful on how to clean helmet visor at home? If you have any suggestions, do not hesitate to share them with us.