Whether you’re a cyclist, motorcyclist, or just someone who enjoys venturing out into the world on two wheels, it’s always a good idea to wear a helmet. As safety and security is the key factor of riding two-wheelers its essential to take care of all the equipment related to it. Removing helmet visors can be tricky even for the best helmets.
Don’t worry, we’re here to help. In this article, we will show you how to take off visor on helmet without any fuss.
We’ll make the removal process as simple and straightforward as possible. So, get ready to roll with ease and safety in mind!
Jump To Contents
How To Take Off Visor On Helmet Within 5 Steps
Here is the entire process of how to remove the bike helmet visor. You just need to follow the instructions as described. Let’s do it!
Step 1: Drop Down The Visor To Its Lower Position
To remove your helmet’s visor, first, drop down the visor to its lower position. This can be done by pushing down on both sides of the visor until it pops out.
Your helmet may contain a slide button. Therefore, never try to lower it manually. Instead, search carefully on the side of the chin. You may need to press this button to drop down the visor.
However, you can manually lower the visor in case your helmet does not have a slide button.
For the convenience of work, you can sit down somewhere, and place the helmet on your lap. If you do not feel comfortable this way, keep the helmet on any steady place like a working table. One more thing to mention, if your helmet includes a detachable chin, you must detach it before starting to work.
Step 2: Free The Connecting Tab Of The Visor
To free the connecting tab of the visor, first, remove the chin strap. If there is a screw on a side of the visor, remove it before attempting to remove the tab.
If there is no screw, simply Lift or bend the tab and it will come off. Once the tab is free, lift up the visor and it should pop off easily.
Step 3: Follow The Same Process For The Other Side
Now, find out and free the connecting tab of the opposite side following step 2. You should not face any difficulty here. At this stage, you will find both sides of the visor of your helmet very loose.
Step 4: Take Out The Visor From The Mounting Pins
Hold both loose ends of the face shield and raise them up from the mounting pins. Drag the visor down cautiously and detach it from your helmet.
If you grab the helmet shield bare hand, it may get fingerprints or scratches. So, to avoid any unwanted incidents, hold it using a clean and soft cloth. In this case, a microfiber cloth will serve the best purpose.
While removing the helmet visor, make sure it does not collide with the inner shell. It may leave scratches on your visor.
Step 5: Clean and Lube the Visor Mechanism
Once the visor is removed, you’ll need to clean and lubricate its mechanism. Use a mild soap and water solution to clean all debris off of the visor’s moving parts. Then apply a light coating of oil to each part of the mechanism.
Time To Re-Install the Helmet Visor
Now that the visor is clean and lubricated, it’s time to install it back onto your helmet. Make sure that both sides of the visor are properly positioned on either side of your helmet’s opening, then press down evenly until it snaps into place.
Replace any protective stickers or film that you might have removed before re-installing the visor.
FAQ(s) On How To Take Off Visor On Helmet
Question 1: How to take the face shield off a helmet?
Answer: If you need to take your face shield off your motorcycle helmet, there are a few different ways to do it.
One way is to use the strap that goes around the back of the helmet and pulls it forward. Another way is to unsnap the chin bar and then remove the face shield. Finally, you can also unsnap the front of the helmet and pull it off.
Question 2: How to remove an HJC helmet visor?
Answer: You may find that your helmet’s visor needs to be removed for a variety of reasons. If this is the case, follow these simple steps:
1) Remove the fastener that secures the visor in place. This can be located in several different areas, so be sure to look for it before trying to remove the visor.
2) Gently maneuver the visor off of the helmet by pushing and pulling from opposite sides. Be careful not to twist or pull on the wiring along the visor’s edge.
3) Carefully remove the Visor from your helmet. Tuck it away somewhere safe if you plan on reusing it later on.
Question 3: How to remove a shark helmet visor?
Answer: How to remove a shark helmet visor? If you have a shark helmet visor and it is no longer fitting correctly or feels uncomfortable, it can be removed easily. Follow these steps:
1. Use your fingers to pinch the edge of the visor and pull it away from the helmet. It should come off easily.
2. If the visor has any adhesives or Velcro, aniexpand them with a small amount of Goo-Gone before attempting to remove them. This will make the adhesive easier to cut through.
3. Inspect the visor for any damage – if there is, fix it before replacing it on your helmet. Replace any torn or damaged parts as needed.
Question 4: How to take a motorcycle helmet off?
Answer: To take a motorcycle helmet off, hold the chin strap in one hand and loosen the fastening at the front of the helmet with your other hand. Gently pull the helmet off of your head. Be sure to store your helmet securely when not in use.
Final Thoughts
Now, you have a clear understanding of how to take off visor on helmet. Whether you have a broken visor or want to clean a dirty one, follow the tricks.
After removing your bike helmet visor, carefully re-attach it. Take extra caution to avoid any damage. This process will work for all kinds of full face, half faced, dirtbike helmet, etc.
If you want to share your tips and tricks, please let us know by commenting below.
Be safe, Keep Safe!
Viola is a mountain bike rider who loved to ride on various off-road tracks. In her half a decade of biking experience she always preferred safe rides. In her early riding days, she fall in an accident and after that, she realized how important this safety thing is. Viola starts writing bike safety-related blogs since then so that other bikers can remain safe while riding.